- Anybody Relaced their Nut(s)?
- dealing with drop d tuning
- STRING BUZZ? ADJUST TRUSS ROD? HELP!!
- Neck Care
- How do you remove the knobs from a Fender Bass?
- Action
- Just Getting Started...Did I pay too much?
- How can I get more sustain?
- setup to have
- fretless bass intonation setup question
- Pickup switch (not on/off)
- Cure for loose neck pockets
- Another Intonation ?
- One step down tuning. Anyone else like it??
- '78 Fender J: truss rod adjustment
- Questions
- Setup of my Fender Jazz Bass
- upright bass brigde and endpin purchases?
- We need a new forum...
- Changing the color
- Hold on to your hats...
- i hate the metallic/twangy sound my bass makes..
- intonation question
- SlipKnoT equip
- Question about bridges...
- Intonation by fret filing?
- High action vs. Low
- Fretted to fretless
- Warped or in need of setup?
- How much relief?
- what do i do???
- Fretless sweet spot
- Stringing short-scale 4 like a 5
- do I need to do some specical setup of the bass for tapping?
- Truss nut bottomed out.
- Step by step instructions for setup???
- Fingerboard care
- Trussrod adjusting; should strings be loosened up before?
- Action to slap
- CAD/CAM bass update
- new moderator
- How To Build a Bass book.
- Stripped Truss Rod
- Getting slap out of your frettless
- Help Me: Action Is CRAZY!
- How to octavate the Hohner Lx200B?
- A different nut material
- Is this fret buzz?
- some kind of hummmmmm
- Refinishing bass
- Sperzel locking tuners.. help!
- Problems with my fretless fender
- string tension? or is it action?
- Can I Up-Tune?
- Replacing Volume pots, help wanted ...
- Grounding or Sheilding
- Neck Types, hope this belongs here
- string or setup solution?
- CRACK!!!
- Replacement bridges
- Where Do I find a new Fingerboard?
- Could use a little more sustain in my bass. Anyone heard of
- J-Neck on a P-Body?
- im thinking of building a new bass....
- defretting
- Badass bridge question
- How do you raise your strings?
- BASS SETUP
- A Twist on 5-string bass
- B-E-A-D Tuning
- can someone recommend a good polishing compound?
- My neck hurts.
- Bass Woods
- Where to get a proffesional setup in Dallas, TX
- What the *&%$!
- Increasing bass looks
- Bassic wiring?
- restoring burn marks??
- Quilted Tops / Finishing Colors ??
- help! The B string on my Toby Pro...
- i have a problem i think
- Deadspot Theory,2-Tek Bridges,GT Fathead etc.
- Warmoth vs. WD vs. All Parts
- Fender Jazz Specs
- What do I need to do before...
- Anyone else into making their own?
- maintenance
- Down Tune?
- Speakon cables
- Grounding/shielding
- i set my inotation today...
- What modifications should I do on my MIM Jazz Bass?
- what is the best set up for someone who likes to DIG in
- Fret click!
- Dead spot & check neck relief
- Jazz pots
- Neck Construction
- Changing Scale Length, Need Advice
- Truss Rods
- Tobias Toby Pro Electronics
- Man!! never noticed till you told me!!
- Tone/woods?
- Upgrading an Ibanez GSR190
- Bass project takes a flying leap...
- Kahler, or well any other trems??!
- How much Relief? (Fretted Basses)
- odd rattle on a stingray
- I really need help!!!!
- I need some help, badly.
- How do I lower the action?
- How do I lower the action?
- Painting your bass (2nd Post)
- Whats the truss rod?
- Strings arc
- new frets?
- Professional set-up
- Dead Spots?????
- Ever heard of stringing it BEAD?
- Help! My Lakland's active electronics croaked!
- My Electronics went too
- B string advice needed...
- best neck/fretboard setup for slap bass
- eq help!
- Fender Mustang Buzzing
- please help!
- nut->bridge pup measurement (Stingray, L-1500, Jazz) - help me, please
- Problem with neck adjustment on Carvin
- What does a bubinga body sound like??
- What is a "Dinky J" body (like Warmoth sells)?
- Need Advice on BEAD tuning :)
- CAD/CAM bass update
- string gauge and stress on the neck
- Epoxy on the Fretboard
- i need a nut!
- a floyd rose for bass is there such thing???
- 6 string F# through G
- Alder body vs. Swamp Ash body
- How high is your action?
- rickenbacker shielding/pickup hum
- plastic nut shifts up
- MIM P-bass nut problem, any ideas?
- 1/4" mono plug to XLR
- Epoxy coating the Fingerboard
- Warwick Thumb Neck Dive
- Should low B str be tuned slightly flat? ( when using an electronic tuner) . tuner
- Wawick Truss Rod Adjustment
- D'OH! A little help?!
- For all people planning on defretting.
- Wrenches
- Putting Frets in a Fretless?
- Precision-Jazz config vs. Jazz-MusicMan config
- Faulty frets
- changing the finish
- Fret buzz
- BADASS 2 BRIDGE?!
- Where to find bridges on the web?
- Help with 5-String
- Neck Radius
- Breaking Strings -- Roller Bridge Available?
- Warwick/High End Bass Users: Advice on Replacement Pickups/Electronics Please
- Need to repair..
- Peavey Milestone II Overhaul
- CLICK!
- Upgrading bridge in jazz bass
- Buzz Feiten tuning system
- Wiring a pickup toggle for a Jazz/Musicman config
- My bass sounds terrible
- Does this indicate a dead pickup??
- Unwanted Harmanics and Hum
- Slap & pop: pickguard or not?
- Should I Use Some Type of Wood Sealer on an Unfinished Maple Neck?
- Where ????
- Help ! Busted nut on fretless jazz bass
- Ripping the frets out of my Warwick...
- Carvin kits...anyone made one?
- Do you really like that Warwick bridge???!!!!
- MIM P-Bass - Upgrades
- What Body Wood For Your Preferred Tone?
- how can i fix the hump in the neck of my bass
- Changing Fretboard Radius?
- Fretless Nut
- CRAP!!!!!
- Fender Pickup covers (Ashtrays)
- My B string is to big for my bridge and nut. Now what do I do???
- Getting the Entwistle sound part.2
- CAD/CAM bass update
- converting a bass to be strung through body
- Difference between normal, flamed, and Quilted woods
- Hmn...Tuner Brands? (Kahler, Gotoh, ect..)
- 4-string Tuning question
- help
- truss rod adjustments
- Warmoth Custom Stuff
- Aguilar onboard preamp
- buzzing noise
- Why FLAT fingerboards are on fashion?
- Upgrading pickups on Steinberger Spirit
- Vantage neck bow...
- Tones of woods used for bass bodies
- SETUP forum posting guidelines
- bass/guitar setup - a new era?
- Comfort Strap
- Setup for blues band?
- Too much EQ. What to do?
- I need mo' money!
- fingerboard relief
- MM Stingrays and their trademark fret noise
- Squier Affinity P-Bass buzz
- Ibanez problem
- CAD/CAM bass project
- Woods, what in it?
- how far off the neck to you suggest your strings be?
- sound
- Yet another De-fretting question
- Truss Rod
- Oops
- Passive fretless 5: Can it be done?
- Saddle?
- action
- string rattle in nut
- Serious Modifications
- Need source for straplock buttons...
- Pros and cons of an onboard preamp
- The Cost of Rollin' Yer Own...
- Sam Ash okay for a setup?
- Fingerboard Wood
- Fretboard care
- Big problem Please Help!!!!!!!
- Tuner Question on Yamaha BB
- Send it out or work on it yourself....
- new necks?!?
- Fretless fingerboard treatment
- Vibrating Arm ?
- Warwick givin' me troubles. . .
- MIM Jazz: Questions on Mods & tweeks
- bass set-up in Denver,CO area?
- can u change string tension?
- going nuts
- Glassbedding
- Fretless: Epoxied or Nude?
- Bohemian paintsody?
- I need intonation help!
- help for the best slap setup
- Twisted Neck!
- MY ACTION IS 2 HIGH NEED HELP
- GET THOSE KNOBS OFF!!!
- Sell your Ergodynes before they fall apart!
- Deluxe jazz bass?
- software to tune bass
- How do I maintain my Tung Oil finished bass?